Nueva e importante actualización de noticias de la Pyra:
(Como curiosidad esta ultima tanda de noticias la ha escrito ED con el prototipo de la Pyra en un viaje en el tren)
Problemas de calentamiento
Han estado haciendo pruebas con materiales que bloquean, disipan o distribuyen el calor y han tenido bastante exito. Con la versión sin optimizar del S.O. con todo activado (Wifi, 3g, pantall, leds, puertos usb, etc) y sin activar la suspension o las facilidades de ahorro de energia se calentaba bastante, de hecho llegaba a alcanzar los 40 grados en unos 10 minutos sin usarla, consumiendo unos 4W (usando los dos cores a plena carga a 1 Ghz con todo activado consume unos 6W).
Poniendo unas pocas capas de material aislante (para evitar que el calor llegue a la bateria y a la cruceta), de 'distribución' de calor y un par de muelles de cobre enganchados a los puertos USB, la pyra funciono durante unos 40 minutos manteniendo una temperatura de 30 grados que es una buena mejora.
Consideran que utilizando lo anterior no necesitan mucho mas, ya que los materiales que utilizan son los mismos que se usan en los smartphone actuales y que sera suficiente para un uso normal. Para un uso continuado con un consumo alto de energia la pyra se calentaria, pero de nuevo consideran que de la misma forma que un telefono movil y que no se puede mejorar salvo que se añada un ventilador (que ya comentaron que no se pondrìa)
Reunión con Global Components
Han tenido una reunión con Global Components y les han dado los costes de producción para la version normal de la Pyra y para la 'premiun' (con 4G y mas sensores)
Por lo que les han pasado parece que podran mantener el precio de 500 euros que dieron inicialmente, pero incorporarian el chip Wifi bueno (el que tenia soporte de 5Ghz) tambien en la unidad normal, no solo en la premium.
Ahora necesitam ver cual es la pedido minimo que van a hacer (MOQ=Minimun order quantity). Segun ellos no sirve si tiene una MOQ para un modelo 4G de 1000 unidades, ya que es necesitan poder mezclarlas (Version Americana y Europea).
Reunión con BOE
El contacto que tenia ED en BOE (el fabricante de las pantallas) se reunió con el la semana pasada para revisar el tema de la pantalla tactil (se veian puntos grises en la pantalla) y por lo que parece la solución al problema es muy sencilla.
La pantalla tactil esta actualmente pegada a la pantalla con cinta adhesiva de doble cara, por ello hay una pequeña cantidad de aire entre el cristal de la pantalla tactil y el LCD. El aire contenido entre las dos refracta la luz lo que produce que la luz entre en la capa de la pantalla tactil. Las pantallas tactiles mate siempre han tenido granillos, pero con la refracción hace que se peor (ya que los colores se refactan en diferentes direcciones).
Otra manera de poner la pantalla tactil es usando adhesivo, de esa forma la pantalla estará pegada al LCD y no existira esa capa de aire entre las dos, lo que deberia solucionar el problema.
Sistema operativo, informacion para el desarrollo y actualización de la Web
Las primaras unidades de la pyra para los desarrolladores las enviaran en una semana (aprox.) y ED estará trabajando los proximos dias en la Web y la Wiki de Pyra para mostrar las ventajas de la misma a la gente nueva que se conecte a la web principal y para dar a los desarrolladores acceso al estado actual del S.O. y del kernel, de tal forma que puedan ayudar a mejorarlo.
Comentan que cualquier ayuda es bien recibida y que proximamente diran como se puede ayudar en otro hilo de los foros de pyra.
Prototipos y tirada de preproducción
Ed comenta que podrían producir 10 juegos de PCB que funcionen en la tirada de los preproducción. Seria suficiente para los desarrolladores, pero no para todos los pedidos de prototipos. Tambien comenta que tienen que arregalar algunas cosas en los prototipos y quieren se envie una carcasa completa con el teclado y que posiblemente tambien añadan el viejo teclado para que puedan comparar, por lo que todavia llevará un tiempo pero que los que han pedido el prototipo seran los primeros en recibir una Pyra.
Preordenes
Ahora que ya tienen un prototipo funcionando es epoca de preordenes
, como ahora ya pueden hacer un calculo de costes correcto (tienen los costes de GC) indican que no se va a tardar mucho en iniciar las preordenes.
Adiconalmente comentan que la bateria esta durando unas 8 horas con un uso del escritorio normal, sin ningun tipo de ahorro de bateria y con todos los componentes activas, lo cual es bastante bueno.
Y lo ultimo es un agradecimiento de de ED a todos los qaue han ayudado en el proceso de conseguir que la pyra sea completamente funcional.
I hope you had some great holidays. Last week was quite busy for me, I had an appointment with Global Components to discuss about the productions cost (yep, it's getting serious now), and I was also fiddling around with the prototype quite a bit.
In fact, I am writing this newspost here in a train using the Pyra prototype. An excellent test for the keyboard.
It takes a bit getting used to (I always hit ' when I want to press SHIFT, as that's where SHIFT was on the Pandora), but I can already type pretty fast.
All keys are easily reachable, they feel good, but as you know, I already decided the keymat will be tweaked a bit to improve it even further.
So, here's what happened last week...
1. Heating tests
I've started playing around with some special heat spreading, blocking and dissipation materials with quite a bit success.
Currently, the unoptimized OS with all features enabled (Wifi, modem, display, all LEDs, all USB ports, etc.) and no suspend or powersaving features enabled gets quite warm without any anti-heat solution... in fact, the CPU reaches 40,1C when just sitting around for 10 minutes, using about 4W (running both cores with full load at 1 GHz uses about 6W with everything enabled)
With just a few layers of cleverly placed heat blockers (to block the heat getting to the battery and the DPad) and some heat spreading as well as two copper springs added to the USB ports, the unit ran for over 40 minutes staying at a comfortable temperature of 30,2C, which is a lot better.
I don't think we need to do much more (after all, those materials are the same every smartphone uses these days), and it will be enough for normal usage. For continuos high power usage, it will still be warm (like every smartphone out there), but there's nothing you can do (except for adding a fan...)
2. Meeting up with Global Components
I had a meeting with GC and received the production costs for both the normal and the spiced up unit (which has 4G and a few more sensors added)
As it looks like, we can keep the prospected 500 EUR price tag, but will use the better Wifi chip (which also has 5GHz speed) in the normal unit as well.
What we need to find out and discuss are some MOQs (Minimum order quantity).
It won't help if a MOQ for one type of the 4G module is 1000 pcs. We need to be able to mix them up (US,European versions).
As usual, I'll let you know as soon as I got more informationa.
3. Meeting with BOE
My BOE contact visited me this week to check the touchscreen issue (heavy color grains) with me.
Thank god it looks like it's a very simple issue.
The touchscreen is currently applied with some double adhesive tape. Because of that, there's a bit of air between the glass of the touchscreen and the LCD.
That air refracts the light which leads to diifused light entering the touchscreen layer.
Matted touchscreens are always a bit grainy, but the added refraction makes it worse (as colors are being refracted to different directions).
Another way to apply the touchscreen is using bonding. That way, a touchscreen is firmly applied to the LCD (without any air inbetween) which should solve that problem.
4. OS, developer info, updated website
The first few developer units will be shipped in about a week and I'll spend the next few days to actively work on the website and Wiki to show the advantages and strength of the Pyra to newcomers on the main site and to give developers access to the current status of the OS and kernel so they can help improve the system.
Any help is welcome. I'll let you know how you can help with other threads on the boards.
5. Protoype units and a preproduction run
We were able to create 10 working PCB sets from the prototype run. This is enough for the developers, but not yet for all the ordered prototypes.
However, we still have a few fixes and the ordered prototypes I want to ship should have a full case and a fixed keymat (though I'll also throw in the old one in case you want to compare it).
So they'll still take a while, but you'll still receive them before anyone else, no worries.
6. Preorders
Well... we now got a working prototype (which I used to type this newspost), so the time for the preorders has finally come!
I will now do a proper cost calculation which means the preorder won't be far away now!
BTW, the battery lasts about 8 hours currently with normal desktop usage... without any powersaving included yet and all components enabled.
That's pretty good already. About the same the Pandora had at the beginning without any powersavings enabled.
7. Some more thoughts
Well, honestly, what a weird feeling. Actually typing ON the Pyra on a train!
It almost feels surreal! It took a long time, but we were always moving forward!
You all played a huge part in the process - so thanks a lot!
It's awesome seeing coming a huge project to an end!
Marcadores