PDA

Ver la versión completa : Confirmado La Primera Yinlips (Soc AMlogic M1) Si tiene Modo Host


Carlos24
25/04/2012, 12:57
Os acordais que hace unos meses pude funcionar teclado/raton desde el PC conectado por Adb en modo depuración? pero desde la consola propiamente no podia probarlo ya que no tenia el cable correspondiente

Pues bien, Acabo de comprar Un cable OTG El mismo de las tablets BQ y funciona a la perfección

Detecta Discos duros USB y tiene soporte con particiones NTFS ; el problema no tiene ningun metodo fisico Para desmontarlo En la interfaz/ajustes de android Es montado en la ruta /mnt/sda/ Automaticamente

Detecta Combo USB Estandard Entre teclado/Raton sin problemas ** Puede no funcionar algunas luces en algunos receptores pero el teclado y raton es detectado sin problemas.

Con estos metodos es possible ampliar las possibles para nuestra consolita de marras Entre otras cosas :

Para navegar por webs esencialmente el teclado y el raton le dá un plus
Para la emulación de PSX y N64 le da otro plus para asignar todos los botones sin problemas. [Ahhh]
Deen0X
25/04/2012, 13:42
ahora, y lo que necesitamos para las consolas con soporte OTG (modo host), es cargar lo necesario para que un dispositivo pueda reconocer un dongle bluetooth conectado, y con esto conectar un mando como un sixaxis (por ejemplo), y usarlo para jugar.

Se que hay dispositivos/tablets que tienen lo necesario (programas, librerías, etc) para que reconozcan y configuren un dongle bluetooth.

(ahí te dejo esa idea, a ver que te parece) ;)
Skelton
25/04/2012, 13:50
Para la primera Yinlips que es Amlogic m1 igual os puede servir como base las modificaciones hechas para ainol advance 8, que se que una de las cosas que le pusieron en los últimos firm era el tema bluetooth.
Deen0X
25/04/2012, 13:55
con hacer una custom rom con bluetooth, te haces famoso fijo.
igual te pido hasta un autógrafo y todo! XD
Skelton
25/04/2012, 14:15
De hecho para las inol 8 advance las hay, creo que la subieron de Android 2.2 a Android 2.3.4, la ventaja entre comillas es que creo que al usar Amlogic m1 las fuentes están disponibles. A lo mejor bitrider que tiene la consola sabría como hacerlo, imagino así por encima que sería compilar el driver bluetooth y "adaptarlo" a la yinlips, que dicho así suena fácil pero debe ser harto complicado
Deen0X
25/04/2012, 14:18
/summit bitrider
Carlos24
25/04/2012, 15:11
Yo estube estudiando la rom de la ainol 8 advance el problema es que no tengo pajoteria idea en sistemas Ubifs Can't mount Ubifs /system

Que por cierto Una gran aplicacion orientativa para estos fines aconsejo tener el USB Host controller te da información si el Host mode esta habilitado sirve para cualquier aparato con Android 2.2 o superior esta en el google play store , tambien da información sobre cualquier cosa que conectes por el miniusb , en caso de un disco duro te da la opción de montarlo en la ruta que quieras .
Que por cierto la Wifi De la yinlips va conectada por Usb En placa curioso es una Realtek.
https://play.google.com/store/apps/details?id=hu.sztupy.android.usbhostcontroller
bitrider
25/04/2012, 18:17
El problema de querer conectar trastos nuevo es que necesitas los módulos para el Kernel. Esto es un problema porque no hay se han publicado las fuentes del kernel que utiliza la Yinlips, habría que currarse uno y añadirle los módulos que necesitásemos. Hasta ahí bien, pero suerte con saber cómo leches está configurado el Amlogic 8726-m1 que lleva hay varios cientos de modificaciones.

No es imposible, pero sí muy difícil. Lo primero sería encontrar el interfaz serie del cacharro y conectarlo al PC para ver qué dice el kernel cuando arranca y saber dónde cascan los kernels que vamos creando.

Lo intenté en su momento (para incorporar soporte de joysticks), pero desistí debido a que -como siempre- me surgieron un par de semanas de mucho curro, no le pude dedicar tiempo y perdí el hilo. Habrá que retomarlo algún día.
Carlos24
25/04/2012, 20:36
Si ese es otro problema en el soc de audio no hay ningun archivo encontrado en los archivos públicos soc/aml/aml_m1_mid_es8328.c

He podido extraer el log durante el arranque todo lo que hace el aparato.


<6>[ 0.000000] Initializing cgroup subsys cpu

<5>[ 0.000000] Linux version 2.6.34 (root@sk-virtual-machine) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1075 Wed Dec 7 18:04:26 CST 2011

<4>[ 0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7f

<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

<4>[ 0.000000] Machine: AMLOGIC MESON-M1 8726M SZ

<4>[ 0.000000] Ignoring unrecognised tag 0x00000000

<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback

<7>[ 0.000000] On node 0 totalpages: 106752

<7>[ 0.000000] free_area_init_node: node 0, pgdat c088f138, node_mem_map c0963000

<7>[ 0.000000] Normal zone: 1024 pages used for memmap

<7>[ 0.000000] Normal zone: 0 pages reserved

<7>[ 0.000000] Normal zone: 105728 pages, LIFO batch:31

<4>[ 0.000000] BUG: mapping for 0x84000000 at 0xc4000000 overlaps vmalloc space

<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105728

<5>[ 0.000000] Kernel command line: init=/init console=ttyS0,115200 mem=512M board_ver=v2 clk81=187500k hdmitx=vdacoff,powermode1,unplug_powerdown rootwait logo=osd1,0x84100000,lcd,full a9_clk=600M

<6>[ 0.000000] other pll setting to crystal_req=24,out_freq=750,n=4,m=125,od=0

<4>[ 0.000000] hdmi: set init powermode 1

<4>[ 0.000000] osd1:1

<4>[ 0.000000] lcd:9

<4>[ 0.000000] full:2

<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[ 0.000000] Memory: 64MB 353MB = 417MB total

<5>[ 0.000000] Memory: 413668k/413668k available, 13340k reserved, 0K highmem

<5>[ 0.000000] Virtual kernel memory layout:

<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)

<5>[ 0.000000] vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)

<5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)

<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)

<5>[ 0.000000] .init : 0xc0008000 - 0xc01ad000 (1684 kB)

<5>[ 0.000000] .text : 0xc01ad000 - 0xc084b024 (6777 kB)

<5>[ 0.000000] .data : 0xc084c000 - 0xc088f740 ( 270 kB)

<6>[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

<6>[ 0.000000] Hierarchical RCU implementation.

<6>[ 0.000000] NR_IRQS:128

<4>[ 0.000000] Console: colour dummy device 80x30

<6>[ 0.000000] console [ttyS0] enabled

<6>[ 0.198000] Calibrating delay loop... 1196.03 BogoMIPS (lpj=5980160)

<4>[ 0.440000] Mount-cache hash table entries: 512

<6>[ 0.443000] Initializing cgroup subsys cpuacct

<6>[ 0.446000] Initializing cgroup subsys freezer

<6>[ 0.451000] CPU: Testing write buffer coherency: ok

<4>[ 0.458000] sram vaddr = e0808000

<6>[ 0.460000] NET: Registered protocol family 16

<6>[ 0.464000] L2X0 cache controller enabled

<6>[ 0.467000] power hold set high!

<6>[ 0.471000] set_vccx2 power up

<4>[ 0.474000] demod_apll_setting crystal_req=24,out_freq=1200,n=1,m=50M

<4>[ 0.480000] select eth clk-1,source=400000000,out=50000000

<5>[ 0.488000] USB PHY clock souce: XTAL input divided by 2

<6>[ 0.491000] register lm device 0

<6>[ 0.494000] register lm device 1

<4>[ 0.497000] chip version=e5832fe0

<4>[ 0.501000] major number 0 for disp


<4>[ 0.504000] register tv module server ok


<6>[ 0.509000] aml-i2c aml-i2c: add adapter aml_i2c_adapter

<6>[ 0.514000] aml-i2c aml-i2c: add adapter aml_i2c_adapter_slow

<6>[ 0.519000] aml-i2c aml-i2c: aml i2c bus driver.

<7>[ 0.524000] cpufreq-meson: transition: 600000 --> 850000

<4>[ 0.524000] sys_clk_setting warning,VCO may no support out_freq,crys_M=24M,out=1700M

<4>[ 0.541000] bio: create slab <bio-0> at 0

<5>[ 0.541000] SCSI subsystem initialized

<6>[ 0.543000] usbcore: registered new interface driver usbfs

<6>[ 0.548000] usbcore: registered new interface driver hub

<6>[ 0.554000] usbcore: registered new device driver usb

<4>[ 0.559000]

<4>[ 0.559000]

<4>[ 0.559000] hh T13 LCD Init.

<4>[ 0.559000]

<4>[ 0.566000] wq t13_power_on

<4>[ 0.570000] wq t13_power_on

<4>[ 0.573000]

<4>[ 0.573000]

<4>[ 0.573000] lcd_set_current_vmode.

<4>[ 0.573000]

<6>[ 0.631000] dwc_otg: version 2.60a 22-NOV-2006

<7>[ 0.631000] dwc_otg lm0: start=0xf9040000

<7>[ 0.631000] dwc_otg lm0: core work at High speed.

<7>[ 0.631000] dwc_otg lm0: DMA config: BURST_SINGLE

<7>[ 1.050000] dwc_otg lm0: Working on port type = OTG

<7>[ 1.050000] dwc_otg lm0: Current port type: SLAVE

<6>[ 1.050000] DWC_otg: Using DMA mode

<6>[ 1.050000] dwc_otg lm0: DWC OTG Controller

<6>[ 1.053000] dwc_otg lm0: new USB bus registered, assigned bus number 1

<6>[ 1.059000] dwc_otg lm0: irq 30, io mem 0x00000000

<6>[ 1.064000] hub 1-0:1.0: USB hub found

<6>[ 1.067000] hub 1-0:1.0: 1 port detected

<6>[ 1.072000] DWC_otg: Shared Tx FIFO mode

<7>[ 1.075000] dwc_otg lm1: start=0xf90c0000

<7>[ 1.075000] dwc_otg lm1: core work at High speed.

<7>[ 1.075000] dwc_otg lm1: DMA config: BURST_SINGLE

<6>[ 1.373000] DWC_otg: USB RESET

<7>[ 1.490000] dwc_otg lm1: Working on port type = HOST

<6>[ 1.490000] DWC_otg: Using DMA mode

<6>[ 1.490000] dwc_otg lm1: DWC OTG Controller

<6>[ 1.493000] dwc_otg lm1: new USB bus registered, assigned bus number 2

<6>[ 1.499000] dwc_otg lm1: irq 31, io mem 0x00000000

<6>[ 1.504000] DWC_otg: Init: Port Power? op_state=1

<6>[ 1.508000] DWC_otg: Init: Power Port (0)

<6>[ 1.513000] hub 2-0:1.0: USB hub found

<6>[ 1.516000] hub 2-0:1.0: 1 port detected

<6>[ 1.523000] Advanced Linux Sound Architecture Driver Version 1.0.22.1.

<6>[ 1.527000] Bluetooth: Core ver 2.15

<6>[ 1.530000] NET: Registered protocol family 31

<6>[ 1.535000] Bluetooth: HCI device and connection manager initialized

<6>[ 1.541000] Bluetooth: HCI socket layer initialized

<6>[ 1.546000] cfg80211: Calling CRDA to update world regulatory domain

<6>[ 1.552000] Switching to clocksource Timer-E

<6>[ 1.557000] NET: Registered protocol family 2

<6>[ 1.561000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

<6>[ 1.568000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

<6>[ 1.575000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

<6>[ 1.581000] TCP: Hash tables configured (established 16384 bind 16384)

<6>[ 1.588000] TCP reno registered

<6>[ 1.591000] UDP hash table entries: 256 (order: 0, 4096 bytes)

<6>[ 1.597000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

<6>[ 1.603000] NET: Registered protocol family 1

<6>[ 1.607000] RPC: Registered udp transport module.

<6>[ 1.612000] RPC: Registered tcp transport module.

<6>[ 1.616000] RPC: Registered tcp NFSv4.1 backchannel transport module.

<6>[ 1.651000] ashmem: initialized

<5>[ 1.656000] VFS: Disk quotas dquot_6.5.2

<4>[ 1.656000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

<6>[ 1.663000] NTFS driver 2.1.29 [Flags: R/W].

<7>[ 1.665000] yaffs built Dec 1 2011 00:09:04 Installing.

<6>[ 1.665000] fuse init (API version 7.13)

<6>[ 1.669000] msgmni has been set to 807

<6>[ 1.675000] alg: No test for stdrng (krng)

<6>[ 1.677000] io scheduler noop registered

<6>[ 1.681000] io scheduler deadline registered

<6>[ 1.685000] io scheduler cfq registered (default)

<6>[ 1.914000] brd: module loaded

<6>[ 1.916000] loop: module loaded

<6>[ 1.918000] PPP generic driver version 2.4.2

<6>[ 1.920000] usbcore: registered new interface driver cdc_acm

<6>[ 1.925000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[ 1.933000] Initializing USB Mass Storage driver...

<6>[ 1.938000] usbcore: registered new interface driver usb-storage

<6>[ 1.944000] USB Mass Storage support registered.

<6>[ 1.949000] usbcore: registered new interface driver usbserial

<6>[ 1.955000] usbserial: USB Serial Driver core

<6>[ 1.959000] USB Serial support registered for GSM modem (1-port)

<6>[ 1.965000] usbcore: registered new interface driver option

<6>[ 1.970000] option: v0.7.2:USB Driver for GSM modems

<6>[ 1.975000] android init

<6>[ 1.978000] android_probe pdata: c085478c

<6>[ 1.982000] android_bind

<7>[ 1.984000] android_bind_config

<6>[ 1.984000] android_usb gadget: android_usb ready

<6>[ 1.989000] f_adb init

<6>[ 1.991000] android_register_function adb

<6>[ 1.995000] f_mass_storage init

<6>[ 1.998000] android_register_function usb_mass_storage

<6>[ 2.004000] mass_storage_bind_config

<6>[ 2.007000] fsg_probe pdata: c08547b0

<6>[ 2.011000] android_usb gadget: Number of LUNs=2

<6>[ 2.015000] adb_bind_config

<6>[ 2.019000] mice: PS/2 mouse device common for all mice

<4>[ 2.024000] set gpio2.22 input

<6>[ 2.027000] input: TSC2007 Touchscreen as /devices/virtual/input/input0

<4>[ 2.034000] tsc2007 probe ok

<6>[ 2.036000] i2c /dev entries driver

<6>[ 2.040000] mxc622x driver: init

<6>[ 2.043000] ecompass driver: init

<6>[ 2.046000] input: ecompass_data as /devices/virtual/input/input1

<6>[ 2.052000] Linux video capture interface: v2.00

<6>[ 2.056000] gt2005 0-003c: chip found @ 0x78 (aml_i2c_adapter)

<4>[ 2.063000] ******* enter itk early suspend register *******

<6>[ 2.068000] gc0308 0-0021: chip found @ 0x42 (aml_i2c_adapter)

<4>[ 2.074000] ******* enter itk early suspend register *******

<6>[ 2.081000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com

<6>[ 2.088000] cpuidle: using governor ladder

<6>[ 2.093000] usbcore: registered new interface driver usbhid

<6>[ 2.097000] usbhid: USB HID core driver

<6>[ 2.102000] logger: created 64K log 'log_main'

<6>[ 2.106000] logger: created 256K log 'log_events'

<6>[ 2.110000] logger: created 64K log 'log_radio'

<6>[ 2.115000] logger: created 64K log 'log_system'

<4>[ 2.119000] start init vout module


<4>[ 2.123000] create vout attribute ok


<4>[ 2.127000] ge2d_init

<4>[ 2.129000] ge2d_dev major:252


<4>[ 2.132000] ge2d start monitor


<4>[ 2.135000] osd_init

<4>[ 2.137000] [osd0] 0x84100000-0x843fffff

<4>[ 2.141000] ge2d workqueue monitor start


<4>[ 2.145000] Frame buffer memory assigned at phy:0x84100000, vir:0xe0c00000, size=3072K

<4>[ 2.156000] [osd1] 0x84400000-0x844fffff

<4>[ 2.157000] Frame buffer memory assigned at phy:0x84400000, vir:0xe0a00000, size=1024K

<4>[ 2.165000] init fbdev bpp is :24


<4>[ 2.169000] osd probe ok


<6>[ 2.171000] enter aml_bl_probe

<4>[ 2.390000]

<4>[ 2.390000]

<4>[ 2.390000] Backlight init.

<4>[ 2.390000]

<6>[ 2.392000] power hold set high!

<6>[ 2.395000] set_vccx2 power up

<4>[ 2.398000] demod_apll_setting crystal_req=24,out_freq=1200,n=1,m=50M

<4>[ 2.405000] select eth clk-1,source=400000000,out=50000000

<4>[ 2.410000] backlight on

<4>[ 2.415000] UART_ttyS0:(irq = 75, address = 0xf11084dc)

<4>[ 2.418000] UART_ttyS1:(irq = 26, address = 0xf11084c0)

<4>[ 2.423000] Port 0 = IRQ 75

<4>[ 2.426000] Port 1 = IRQ 26

<6>[ 2.429000] Amlogic nand flash host controll driver for m1, Version 1.0 (c) 2010 Amlogic Inc.

<6>[ 2.437000] aml_m1_nand aml_m1_nand.0: time_mode=5, bus_cycle=3, tREA=20, tRHOH=15, adjust=1 system=5

<4>[ 2.446000] No NAND device found.

<4>[ 2.450000] NAND device id: ec d7 94 7a 54 43

<6>[ 2.454000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xec (Samsung 2 Generation NAND 4GiB K9GBG08U0A)

<5>[ 2.464000] Creating 1 MTD partitions on "2 Generation NAND 4GiB K9GBG08U0A":

<5>[ 2.471000] 0x000000000000-0x000000800000 : "nandboot"

<4>[ 2.477000] nand communication have uncorrectable ecc error

<4>[ 2.481000] read oob ecc failed at page 512

<4>[ 2.485000] NAND detect Bad block at 400000

<4>[ 2.490000] nand communication have uncorrectable ecc error

<4>[ 2.495000] read oob ecc failed at page 640

<4>[ 2.499000] NAND detect Bad block at 500000

<6>[ 2.505000] aml_m1_nand aml_m1_nand.0: time_mode=5, bus_cycle=3, tREA=20, tRHOH=15, adjust=1 system=5

<4>[ 2.513000] No NAND device found.

<4>[ 2.516000] NAND device id: ec d7 94 7a 54 43

<6>[ 2.521000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xec (Samsung 2 Generation NAND 4GiB K9GBG08U0A)

<6>[ 2.530000] 1 NAND chips detected

<4>[ 2.533000] havn`t found any oob layout use nand base oob layout oobsize 1280

<5>[ 2.541000] Creating 8 MTD partitions on "2 Generation NAND 4GiB K9GBG08U0A":

<5>[ 2.548000] 0x000002000000-0x000003000000 : "logo"

<5>[ 2.555000] 0x000003000000-0x000004000000 : "aml_logo"

<5>[ 2.560000] 0x000004000000-0x000006000000 : "recovery"

<5>[ 2.566000] 0x000006000000-0x000008000000 : "boot"

<5>[ 2.571000] 0x000008000000-0x000018000000 : "system"

<5>[ 2.595000] 0x000018000000-0x000020000000 : "cache"

<5>[ 2.607000] 0x000020000000-0x000040000000 : "userdata"

<5>[ 2.654000] 0x000040000000-0x000103800000 : "NFTL_Part"

<4>[ 2.655000] nand communication have uncorrectable ecc error

<4>[ 2.659000] read oob ecc plane0 failed at blk 1036 chip: 0

<4>[ 2.665000] NAND detect Bad block at 40c00000

<4>[ 2.779000] NAND detect Bad block at 88600000

<4>[ 2.969000] nand communication have uncorrectable ecc error

<4>[ 2.969000] read oob ecc plane0 failed at blk 1036 chip: 0

<4>[ 2.975000] get status error at blk: 6

<4>[ 3.083000] get status faile at blk: 579

<4>[ 3.083000] NAND detect Bad block at 88600000

<4>[ 3.264000] nftl initilize completely dev size: 0xbd800000

<4>[ 3.265000] Amlogic A/V streaming port init

<4>[ 3.271000] amvdec_vc1 module init

<4>[ 3.272000] amvdec_h264 module init

<4>[ 3.275000] amvdec_real module init

<4>[ 3.279000] Amlogic deinterlace init

<4>[ 3.282000] Deinterlace memory: start = 0x89500000, end = 0x897fffff

<6>[ 3.288000] Keypad Driver

<6>[ 3.291000] input: aml_keypad as /devices/platform/m1-kp.0/input/input2

<4>[ 3.298000] remote config major:250


<4>[ 3.301000] physical address:0x9f504000

<6>[ 3.305000] SARADC Driver init.

<6>[ 3.308000] saradc use internal calibration

<6>[ 3.312000] saradc calibration fail

<6>[ 3.316000] ADC Keypad Driver init.

<4>[ 3.319000] 00 input_dev=-537407488 ,kp->input=-537407488

<4>[ 3.324000] 11input_dev=-537407488 ,kp->input=-537407488

<6>[ 3.330000] chan #4 used for ADC key

<6>[ 3.333000] menu key(125) registed.

<6>[ 3.337000] exit key(15) registed.

<6>[ 3.340000] home key(102) registed.

<6>[ 3.344000] start key(28) registed.

<6>[ 3.347000] chan #0 used for ADC key

<6>[ 3.351000] right key(106) registed.

<6>[ 3.354000] left key(105) registed.

<6>[ 3.358000] vo+ key(103) registed.

<6>[ 3.361000] vol- key(108) registed.

<6>[ 3.365000] input: adc_keypad as /devices/platform/m1-adckp.0/input/input3

<4>[ 3.372000] adc keypad register input device completed.


<4>[ 3.377000] adc keypad major:249


<6>[ 3.381000] Key input Driver init.

<6>[ 3.383000] Key 116 registed.

<6>[ 3.386000] input: key_input as /devices/platform/m1-keyinput.0/input/input4

<4>[ 3.394000] Key input register input device completed.


<4>[ 3.399000] key_input major:248


<3>[ 3.402000] Error: Driver 'tsc2007' is already registered, aborting...

<4>[ 3.408000] Memory Card media Major: 253

<4>[ 3.412000] card max_req_size is 128K

<4>[ 3.416000] wq ############# is_power = 1

<4>[ 3.422000] card creat process sucessful

<6>[ 3.426000] [dsp]DSP start addr 0xc4000000

<6>[ 3.430000] [dsp]register dsp to char divece(232)

<6>[ 3.436000] using rtc device, aml_rtc, for alarms

<6>[ 3.439000] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0

<4>[ 3.446000] amlogic power supply init

<4>[ 3.449000] gpio dev major number:247


<4>[ 3.453000] create gpio device success

<4>[ 3.456000] amvdec_656in module init

<4>[ 3.460000] amvdec_656in probe start.

<4>[ 3.463000] amvdec_656in probe end.

<6>[ 3.467000] vdin[0] memory start addr is 86500000, mem_size is 2000000 .

<6>[ 3.474000] vdin0: flags:0x0

<6>[ 3.477000] vdin: driver initialized ok

<4>[ 3.482000] amlogic rfkill init

<4>[ 3.483000] Set HDMI:Chip C

<4>[ 3.487000] power off hdmi, unmux hpd

<4>[ 3.490000] WQ ############## flag = 1,

<4>[ 3.640000]

<4>[ 3.640000] SD/MMC initialization started......

<6>[ 3.830000] usb 2-1: new high speed USB device using dwc_otg and address 2

<4>[ 3.901000] HCI UART driver ver 2.2

<6>[ 3.901000] Bluetooth: HCI H4 protocol initialized

<4>[ 3.904000] es8328_register

<4>[ 3.910000] soc_es8328_set_bias_level

<3>[ 3.910000] ES8328: soc_es8328_set_bias_level() off with power

<6>[ 3.916000] BT_RADIO going: on

<6>[ 3.919000] BCM_BT: going ON

<4>[ 3.922000] No device for DAI aml-dai0

<4>[ 3.925000] ***Entered sound/soc/aml/aml_m1_mid_es8328.c:aml_m1_audio_probe

<4>[ 3.932000] aml-pcm 0:preallocate_dma_buffer: area=ffc2c000, addr=9f080000, size=32768

<4>[ 3.940000] aml-pcm 1:preallocate_dma_buffer: area=ffc3d000, addr=9f0a0000, size=32768

<6>[ 3.948000] asoc: ES8328 <-> aml-dai0 mapping ok

<4>[ 3.953000] ***aml_m1_codec_init 000000***

<4>[ 3.956000] ***aml_m1_codec_init 3***

<4>[ 3.960000] WQ ############## flag = 1,

<4>[ 3.965000] DAPM sequencing finished, waiting 2ms

<4>[ 3.970000] DAPM sequencing finished, waiting 2ms

<4>[ 3.980000] DAPM sequencing finished, waiting 2ms

<6>[ 3.991000] input: AML-M1 hp_switch as /devices/platform/soc-audio/sound/card0/input5

<6>[ 3.995000] ALSA device list:

<6>[ 3.996000] #0: AML-M1 (es8328)

<6>[ 4.000000] TCP cubic registered

<6>[ 4.003000] NET: Registered protocol family 10

<6>[ 4.008000] IPv6 over IPv4 tunneling driver

<6>[ 4.012000] NET: Registered protocol family 17

<6>[ 4.015000] NET: Registered protocol family 15

<6>[ 4.020000] Bluetooth: L2CAP ver 2.14

<6>[ 4.024000] Bluetooth: L2CAP socket layer initialized

<6>[ 4.028000] Bluetooth: SCO (Voice Link) ver 0.6

<6>[ 4.033000] Bluetooth: SCO socket layer initialized

<6>[ 4.038000] Bluetooth: RFCOMM TTY layer initialized

<6>[ 4.043000] Bluetooth: RFCOMM socket layer initialized

<6>[ 4.048000] Bluetooth: RFCOMM ver 1.11

<6>[ 4.051000] lib80211: common routines for IEEE802.11 drivers

<7>[ 4.057000] lib80211_crypt: registered algorithm 'NULL'

<6>[ 4.057000] enter meson_pm_probe!

<4>[ 4.060000] compare code in sram addr = 0xe0808200, size = 0x11c, result = 0

<6>[ 4.067000] meson_pm_probe done 0xe0808200 284!

<6>[ 4.277000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1

<4>[ 4.282000] registered taskstats version 1

<6>[ 4.285000] aml_rtc aml_rtc: setting system clock to 2012-02-25 10:12:14 UTC (1330164734)

<4>[ 4.292000] Build the dev/console in kernel mode.

<6>[ 4.297000] init_post.

<6>[ 4.299000] Freeing init memory: 1684K

<6>[ 4.303000] run_init_process /init.

<6>[ 4.307000] init:

<6>[ 4.307000] === init start ===

<6>[ 4.311000] init:

<6>[ 4.311000] === create basic filesystem ===

<6>[ 4.317000] init:

<6>[ 4.317000] === mount devpts proc sysfs ===

<6>[ 4.323000] init:

<6>[ 4.324000] === reading config file /init.rc ===

<3>[ 4.331000] init: /init.rc: 317: invalid command 'echo'

<3>[ 4.335000] init: /init.rc: 317: invalid command 'echo'

<6>[ 4.341000] init:

<6>[ 4.341000] === reading config file /init.amlogic.rc ===

<6>[ 4.348000] init:

<6>[ 4.348000] === early init ===fx_test

<6>[ 4.353000] init: processing action 0x2ce28 (early-init)

<6>[ 4.359000] init: command 'symlink' r=0

<6>[ 4.379000] init: command 'write' r=0

<6>[ 4.395000] init: command 'write' r=0

<4>[ 4.405000] UMP<2>: Inserting UMP device driver. Compiled: Apr 13 2011, time: 14:55:56

<4>[ 4.408000] UMP<2>: Using OS memory backend, allocation limit: 67108864

<4>[ 4.414000] UMP: UMP device driver loaded

<6>[ 4.418000] init: command 'insmod' r=0

<6>[ 4.422000] init: command 'device' r=0

<4>[ 4.446000] Mali<2>:

<4>[ 4.446000] Mali<2>: Inserting Mali v7 device driver.

<4>[ 4.448000] Mali<2>: Compiled: Apr 20 2011, time: 22:49:29.

<4>[ 4.454000] Mali<2>: Svn revision:

<4>[ 4.457000] Mali<2>: MMU memory system initializing

<4>[ 4.462000] Mali<2>: Rendercore: subsystem global mutex initialized

<4>[ 4.468000] Mali<2>: Core: subsystem_init: Mali-400 PP

<4>[ 4.473000] Mali<2>: Core: subsystem_init: Mali-400 GP

<4>[ 4.478000] Mali<2>: Mali L2 cache system initializing

<4>[ 4.484000] Mali<2>: MMU registered

<4>[ 4.487000] Mali<2>: MMU registered

<4>[ 4.490000] Mali<2>: Mali OS memory allocator created with max allocation size of 0x6000000 bytes, cpu_usage_adjust 0x00000000

<4>[ 4.502000] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base==0x84000000, size==0x06000000, cpu_adjust==0x00000000

<4>[ 4.515000] Mali<2>: Creating Mali L2 cache: Mali-400 L2 cache

<4>[ 4.521000] Mali<1>: Mali memory allocators will be used in this order of preference (lowest numbered first) :

<4>[ 4.531000] Mali<1>: 5: Mali Memory

<4>[ 4.535000] Mali<2>: Attach mmu: 0xdf218120 to core: Mali-400 PP in subsystem: Mali-400 PP

<4>[ 4.542000] Mali<2>: Attach mmu: 0xdf2180c0 to core: Mali-400 GP in subsystem: Mali-400 GP

<4>[ 4.551000] Mali<2>: Mali L2 cache system load complete

<4>[ 4.556000] Mali: Mali device driver loaded

<6>[ 4.560000] init: command 'insmod' r=0

<6>[ 4.564000] init: command 'device' r=0

<6>[ 4.567000] init:

<6>[ 4.567000] === device init ===

<6>[ 4.876000] init:

<6>[ 4.876000] === property init ===

<6>[ 4.876000] init:

<6>[ 4.876000] === load boot logo ===

<6>[ 4.915000] init:

<6>[ 4.915000] === set properties ===

<6>[ 4.915000] init:

<6>[ 4.915000] === init trigger ===

<6>[ 4.920000] init: processing action 0x2cf80 (init)

<6>[ 4.924000] init: command 'mkdir' r=-17

<6>[ 4.928000] init: command 'mkdir' r=-17

<6>[ 4.932000] init:

<6>[ 4.932000] === do_ubiattach start ===

<6>[ 4.938000] init: mtd partition 0, nandboot

<6>[ 4.942000] init: mtd partition 1, logo

<6>[ 4.946000] init: mtd partition 2, aml_logo

<6>[ 4.950000] init: mtd partition 3, recovery

<6>[ 4.954000] init: mtd partition 4, boot

<6>[ 4.958000] init: mtd partition 5, system

<6>[ 4.962000] init: mtd partition 6, cache

<6>[ 4.966000] init: mtd partition 7, userdata

<6>[ 4.970000] init: mtd partition 8, NFTL_Part

<5>[ 4.974000] UBI: attaching mtd5 to ubi0

<5>[ 4.978000] UBI: physical eraseblock size: 2097152 bytes (2048 KiB)

<5>[ 4.984000] UBI: logical eraseblock size: 2064384 bytes

<5>[ 4.990000] UBI: smallest flash I/O unit: 16384

<5>[ 4.995000] UBI: VID header offset: 16384 (aligned 16384)

<5>[ 5.001000] UBI: data offset: 32768

<4>[ 5.064000] Actual delay time in sd_voltage_validation() = 320 ms

<4>[ 5.137000] set sd_mmc config_reg->cmd_clk_divide 1, CLK 46M

<4>[ 5.137000] sd_mmc_init() is completed successfully!

<4>[ 5.142000] This SDHC card is working in Wide Bus and high speed mode!

<4>[ 5.142000]

<6>[ 5.151000] cardblksd: cardblksd1

<4>[ 5.159000] wq ############# is_power = 1

<4>[ 5.159000]

<4>[ 5.159000] SD/MMC initialization started......

<5>[ 5.316000] UBI: empty MTD device detected

<5>[ 5.321000] UBI: attached mtd5 to ubi0

<5>[ 5.321000] UBI: MTD device name: "system"

<5>[ 5.324000] UBI: MTD device size: 256 MiB

<5>[ 5.329000] UBI: number of good PEBs: 128

<5>[ 5.333000] UBI: number of bad PEBs: 0

<5>[ 5.338000] UBI: max. allowed volumes: 128

<5>[ 5.342000] UBI: wear-leveling threshold: 4096

<5>[ 5.347000] UBI: number of internal volumes: 1

<5>[ 5.351000] UBI: number of user volumes: 1

<5>[ 5.356000] UBI: available PEBs: 0

<5>[ 5.360000] UBI: total number of reserved PEBs: 128

<5>[ 5.365000] UBI: number of PEBs reserved for bad PEB handling: 2

<5>[ 5.371000] UBI: max/mean erase counter: 12/6

<5>[ 5.375000] UBI: image sequence number: 0

<5>[ 5.379000] UBI: background thread "ubi_bgt0d" started, PID 47

<6>[ 5.489000] init: command 'ubiattach' r=0

<5>[ 5.662000] UBIFS: recovery needed

<5>[ 5.892000] UBIFS: recovery completed

<5>[ 5.892000] UBIFS: mounted UBI device 0, volume 0, name "system"

<5>[ 5.896000] UBIFS: file system size: 233275392 bytes (227808 KiB, 222 MiB, 113 LEBs)

<5>[ 5.904000] UBIFS: journal size: 16515073 bytes (16128 KiB, 15 MiB, 6 LEBs)

<5>[ 5.911000] UBIFS: media format: w4/r0 (latest is w4/r0)

<5>[ 5.917000] UBIFS: default compressor: lzo

<5>[ 5.921000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)

<6>[ 5.929000] init: command 'mount' r=0

<6>[ 5.930000] init:

<6>[ 5.930000] === do_ubiattach start ===

<5>[ 5.936000] UBI: attaching mtd7 to ubi1

<5>[ 5.940000] UBI: physical eraseblock size: 2097152 bytes (2048 KiB)

<5>[ 5.946000] UBI: logical eraseblock size: 2064384 bytes

<5>[ 5.952000] UBI: smallest flash I/O unit: 16384

<5>[ 5.957000] UBI: VID header offset: 16384 (aligned 16384)

<5>[ 5.963000] UBI: data offset: 32768

<4>[ 6.006000] No any SD/MMC card detected!

<4>[ 6.006000] #SD_MMC_ERROR_DRIVER_FAILURE error occured in sd_voltage_validation()

<5>[ 6.346000] UBI: empty MTD device detected

<5>[ 6.351000] UBI: attached mtd7 to ubi1

<5>[ 6.351000] UBI: MTD device name: "userdata"

<5>[ 6.355000] UBI: MTD device size: 512 MiB

<5>[ 6.360000] UBI: number of good PEBs: 256

<5>[ 6.364000] UBI: number of bad PEBs: 0

<5>[ 6.369000] UBI: max. allowed volumes: 128

<5>[ 6.373000] UBI: wear-leveling threshold: 4096

<5>[ 6.378000] UBI: number of internal volumes: 1

<5>[ 6.382000] UBI: number of user volumes: 1

<5>[ 6.387000] UBI: available PEBs: 0

<5>[ 6.391000] UBI: total number of reserved PEBs: 256

<5>[ 6.396000] UBI: number of PEBs reserved for bad PEB handling: 2

<5>[ 6.402000] UBI: max/mean erase counter: 73/19

<5>[ 6.406000] UBI: image sequence number: 0

<5>[ 6.410000] UBI: background thread "ubi_bgt1d" started, PID 49

<6>[ 6.416000] init: command 'ubiattach' r=0

<5>[ 6.723000] UBIFS: recovery needed

<5>[ 7.427000] UBIFS: recovery completed

<5>[ 7.428000] UBIFS: mounted UBI device 1, volume 0, name "userdata"

<5>[ 7.432000] UBIFS: file system size: 497516544 bytes (485856 KiB, 474 MiB, 241 LEBs)

<5>[ 7.440000] UBIFS: journal size: 24772608 bytes (24192 KiB, 23 MiB, 12 LEBs)

<5>[ 7.447000] UBIFS: media format: w4/r0 (latest is w4/r0)

<5>[ 7.453000] UBIFS: default compressor: lzo

<5>[ 7.457000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)

<6>[ 7.466000] init: command 'mount' r=0

<6>[ 7.467000] init: command 'chown' r=0

<6>[ 7.470000] init: command 'chmod' r=0

<6>[ 7.474000] init: command 'sysclktz' r=0

<6>[ 7.478000] init: command 'loglevel' r=0

<6>[ 7.482000] init: command 'export' r=0

<6>[ 7.485000] DWC_otg: USB RESET

<6>[ 7.488000] init: command 'export' r=0

<6>[ 7.492000] init: command 'export' r=0

<6>[ 7.496000] init: command 'export' r=0

<6>[ 7.500000] init: command 'export' r=0

<6>[ 7.503000] init: command 'export' r=0

<6>[ 7.507000] init: command 'export' r=0

<6>[ 7.642000] DWC_otg: USB RESET

<6>[ 7.693000] init: command 'export' r=0

<6>[ 7.693000] init: command 'export' r=0

<4>[ 7.777000] register_blkdev: cannot get major 250 for avnftl

<4>[ 7.777000] Unable to register avnftl block device on major 250: -16

<6>[ 7.784000] init: command 'insmod' r=-1

<4>[ 7.873000] rtw driver version=v2.0.1606.amlogic.dbg.01

<4>[ 7.873000] CONFIG_ANDROID is defined.

<4>[ 7.876000] ##########rtw_suspend_lock_init ###########

<4>[ 7.881000] register rtl8192_netdev_ops to netdev_ops

<4>[ 7.886000]

<4>[ 7.886000] 8192_usb_endpoint_descriptor(0):

<4>[ 7.892000] bLength=7

<4>[ 7.894000] bDescriptorType=5

<4>[ 7.897000] bEndpointAddress=81

<4>[ 7.900000] wMaxPacketSize=200

<4>[ 7.903000] bInterval=0

<4>[ 7.906000]

<4>[ 7.906000] 8192_usb_endpoint_descriptor(1):

<4>[ 7.911000] bLength=7

<4>[ 7.914000] bDescriptorType=5

<4>[ 7.917000] bEndpointAddress=2

<4>[ 7.920000] wMaxPacketSize=200

<4>[ 7.923000] bInterval=0

<4>[ 7.925000]

<4>[ 7.925000] 8192_usb_endpoint_descriptor(2):

<4>[ 7.931000] bLength=7

<4>[ 7.933000] bDescriptorType=5

<4>[ 7.936000] bEndpointAddress=3

<4>[ 7.939000] wMaxPacketSize=200

<4>[ 7.942000] bInterval=0

<4>[ 7.944000]

<4>[ 7.944000] 8192_usb_endpoint_descriptor(3):

<4>[ 7.950000] bLength=7

<4>[ 7.952000] bDescriptorType=5

<4>[ 7.955000] bEndpointAddress=84

<4>[ 7.958000] wMaxPacketSize=40

<4>[ 7.961000] bInterval=1

<4>[ 7.964000] nr_endpoint=4, in_num=2, out_num=2

<4>[ 7.964000]

<4>[ 7.970000] 8192cu: USB_SPEED_HIGH

<4>[ 7.973000] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.

<4>[ 7.979000] initial psecuritypriv->sw_encrypt:0

<4>[ 7.983000] EEPROM type is E-FUSE

<4>[ 7.986000] ====> ReadAdapterInfo8192C

<4>[ 7.990000] Boot from EFUSE, Autoload Success !

<4>[ 7.999000] rtw_efuse_get_max_phy_size...eeprompriv.efuse_phy_ max_size(504)

<4>[ 8.135000] EEPROMVID = 0x0bda

<4>[ 8.135000] EEPROMPID = 0x8176

<4>[ 8.135000] EEPROMCustomerID : 0x00

<4>[ 8.139000] EEPROMSubCustomerID: 0x00

<4>[ 8.142000] RT_CustomerID: 0x00

<6>[ 8.146000] android_usb gadget: high speed config #1: android

<4>[ 8.151000] RT_ChannelPlan: (0x0a:0x0b)

<4>[ 8.155000] _ReadBoardType(0)

<4>[ 8.158000] ### AntDivCfg(0)

<4>[ 8.161000] BT Coexistance = disable

<4>[ 8.164000] _ReadHWPDSelection...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)

<4>[ 8.173000] ### PS params=> power_mgnt(1),usbss_enable(0) ###

<4>[ 8.179000] _InitAdapterVariablesByPROM(): REPLACEMENT = 1

<4>[ 8.184000] <==== ReadAdapterInfo8192C in 200 ms

<4>[ 8.189000] MAC Address from efuse= 00:18:11:19:99:6f

<4>[ 8.195000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0

<6>[ 8.201000] usbcore: registered new interface driver rtw_usb_drv

<6>[ 8.207000] init: command 'insmod' r=0

<6>[ 8.211000] init: command 'symlink' r=0

<6>[ 8.214000] init: command 'symlink' r=0

<6>[ 8.218000] init: command 'mkdir' r=0

<6>[ 8.222000] init: command 'mkdir' r=0

<6>[ 8.225000] init: command 'mkdir' r=0

<6>[ 8.229000] init: command 'mkdir' r=0

<6>[ 8.233000] init: command 'mkdir' r=0

<6>[ 8.236000] init: command 'mount' r=0

<6>[ 8.240000] init: command 'mkdir' r=0

<6>[ 8.244000] init: command 'symlink' r=0

<6>[ 8.247000] init: command 'symlink' r=0

<6>[ 8.251000] init: command 'symlink' r=0

<6>[ 8.255000] init: command 'mkdir' r=0

<6>[ 8.259000] init: command 'mkdir' r=0

<6>[ 8.262000] init: command 'mkdir' r=0

<6>[ 8.266000] init: command 'mkdir' r=0

<6>[ 8.270000] init: command 'mkdir' r=0

<6>[ 8.273000] init: command 'mount' r=0

<6>[ 8.277000] init: command 'write' r=0

<6>[ 8.281000] init: command 'write' r=0

<6>[ 8.284000] init: command 'write' r=0

<6>[ 8.288000] init: command 'write' r=0

<6>[ 8.291000] init: command 'write' r=0

<6>[ 8.295000] init: command 'write' r=0

<6>[ 8.299000] init: command 'write' r=0

<6>[ 8.302000] init: command 'mkdir' r=0

<6>[ 8.306000] init: command 'mount' r=0

<6>[ 8.310000] init: command 'chown' r=0

<6>[ 8.313000] init: command 'chown' r=0

<6>[ 8.317000] init: command 'chmod' r=0

<6>[ 8.320000] init: command 'write' r=-22

<6>[ 8.324000] init: command 'mkdir' r=0

<6>[ 8.328000] init: command 'chown' r=0

<6>[ 8.332000] init: command 'chmod' r=0

<6>[ 8.335000] init: command 'write' r=0

<6>[ 8.339000] init: command 'mkdir' r=0

<6>[ 8.342000] init: command 'chown' r=0

<6>[ 8.346000] init: command 'chmod' r=0

<6>[ 8.350000] init: command 'write' r=0

<6>[ 8.358000] init: command 'mkdir' r=-17

<6>[ 8.358000] init: command 'chmod' r=0

<6>[ 8.363000] init: command 'mkdir' r=-17

<6>[ 8.365000] init: command 'chown' r=0

<6>[ 8.368000] init: command 'chmod' r=0

<6>[ 8.372000] init: command 'copy' r=-1

<6>[ 8.376000] init: command 'chown' r=-2

<6>[ 8.379000] init: command 'chmod' r=-2

<6>[ 8.383000] init: command 'copy' r=-1

<6>[ 8.387000] init: command 'chown' r=-2

<6>[ 8.390000] init: command 'chmod' r=-2

<6>[ 8.394000] init: command 'write' r=-2

<6>[ 8.398000] init: command 'mkdir' r=0

<6>[ 8.402000] yaffs: dev is 32505862 name is "mtdblock6" rw

<6>[ 8.407000] yaffs: passed flags ""

<7>[ 8.410000] yaffs: Attempting MTD mount of 31.6,"mtdblock6"

<4>[ 8.410000] yaffs2 check point success.

<7>[ 8.432000] yaffs: restored from checkpoint

<7>[ 8.432000] yaffs_read_super: isCheckpointed 1

<6>[ 8.433000] init: command 'mount' r=0

<6>[ 8.435000] init: command 'chown' r=0

<6>[ 8.439000] init: command 'chmod' r=0

<6>[ 8.439000] init: command 'mount' r=0

<6>[ 8.459000] init: command 'chown' r=0

<6>[ 8.462000] init: command 'chmod' r=0

<6>[ 8.462000] init: command 'chown' r=0

<6>[ 8.464000] init: command 'chmod' r=0

<6>[ 8.468000] init: command 'chown' r=0

<6>[ 8.471000] init: command 'chmod' r=0

<6>[ 8.475000] init: command 'chown' r=0

<6>[ 8.479000] init: command 'chmod' r=0

<6>[ 8.484000] init: command 'mkdir' r=-17

<6>[ 8.488000] init: command 'mkdir' r=-17

<6>[ 8.491000] init: command 'mkdir' r=-17

<6>[ 8.496000] init: command 'mkdir' r=-17

<6>[ 8.499000] init: command 'mkdir' r=-17

<6>[ 8.503000] init: command 'mkdir' r=-17

<6>[ 8.506000] init: command 'mkdir' r=-17

<6>[ 8.510000] init: command 'mkdir' r=-17

<6>[ 8.514000] init: command 'mkdir' r=-17

<6>[ 8.517000] init: command 'chmod' r=0

<6>[ 8.521000] init: command 'chmod' r=0

<6>[ 8.524000] init: command 'chown' r=0

<6>[ 8.527000] init: command 'chown' r=0

<6>[ 8.531000] init: command 'chown' r=0

<6>[ 8.537000] init: command 'mkdir' r=-17

<6>[ 8.540000] init: command 'mkdir' r=-17

<6>[ 8.544000] init: command 'mkdir' r=-17

<6>[ 8.548000] init: command 'mkdir' r=-17

<6>[ 8.551000] init: command 'mkdir' r=-17

<6>[ 8.555000] init: command 'mkdir' r=-17

<6>[ 8.558000] init: command 'mkdir' r=-17

<6>[ 8.561000] init: command 'chmod' r=0

<6>[ 8.565000] init: command 'chmod' r=-2

<6>[ 8.569000] init: command 'chmod' r=0

<6>[ 8.572000] init: command 'chmod' r=0

<6>[ 8.576000] BT_RADIO going: off

<6>[ 8.579000] BCM_BT: going OFF

<6>[ 8.811000] init: command 'write' r=0

<6>[ 8.812000] init: command 'mkdir' r=-17

<6>[ 8.813000] init: command 'chown' r=0

<6>[ 8.817000] init: command 'chmod' r=0

<6>[ 8.822000] init: command 'mkdir' r=-17

<6>[ 8.824000] init: command 'mkdir' r=-17

<6>[ 8.828000] init: command 'mkdir' r=0

<6>[ 8.832000] init: command 'chown' r=0

<6>[ 8.836000] init: command 'chmod' r=0

<6>[ 8.841000] init: command 'chown' r=0

<6>[ 8.846000] init: command 'chmod' r=0

<6>[ 8.870000] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'

<6>[ 8.874000] init:

<6>[ 8.874000] === early boot trigger ===

<6>[ 8.879000] init:

<6>[ 8.879000] === boot trigger ===

<6>[ 8.884000] init: processing action 0x2e328 (boot)

<6>[ 8.892000] init: command 'setprop' r=0

<6>[ 8.893000] init: command 'setprop' r=0

<6>[ 8.898000] init: command 'mkdir' r=-17

<6>[ 8.901000] init: command 'chmod' r=0

<6>[ 8.905000] init: command 'ifup' r=0

<6>[ 8.908000] init: command 'hostname' r=0

<6>[ 8.912000] init: command 'domainname' r=0

<6>[ 8.916000] init: command 'setrlimit' r=0

<6>[ 8.920000] init: command 'setprop' r=0

<6>[ 8.924000] init: command 'setprop' r=0

<6>[ 8.927000] init: command 'setprop' r=0

<6>[ 8.931000] init: command 'setprop' r=0

<6>[ 8.935000] init: command 'setprop' r=0

<6>[ 8.939000] init: command 'setprop' r=0

<6>[ 8.943000] init: command 'setprop' r=0

<6>[ 8.946000] init: command 'setprop' r=0

<6>[ 8.950000] init: command 'setprop' r=0

<6>[ 8.954000] init: command 'setprop' r=0

<6>[ 8.958000] init: command 'setprop' r=0

<6>[ 8.962000] init: command 'setprop' r=0

<6>[ 8.965000] init: command 'setprop' r=0

<6>[ 8.969000] init: command 'setprop' r=0

<6>[ 8.973000] init: command 'setprop' r=0

<6>[ 8.977000] init: command 'setprop' r=0

<6>[ 8.981000] init: command 'setprop' r=0

<6>[ 8.984000] init: command 'setprop' r=0

<6>[ 8.988000] init: command 'setprop' r=0

<6>[ 8.992000] init: command 'write' r=0

<6>[ 8.996000] init: command 'write' r=0

<6>[ 8.999000] init: command 'write' r=0

<6>[ 9.003000] init: command 'write' r=0

<6>[ 9.007000] init: command 'write' r=0

<6>[ 9.010000] init: command 'write' r=0

<6>[ 9.014000] init: command 'write' r=0

<6>[ 9.018000] init: command 'chown' r=-2

<6>[ 9.022000] init: command 'chown' r=-2

<6>[ 9.025000] init: command 'chown' r=-2

<6>[ 9.029000] init: command 'chown' r=-2

<6>[ 9.032000] init: command 'chown' r=-2

<6>[ 9.036000] init: command 'chown' r=0

<6>[ 9.040000] init: command 'chown' r=0

<6>[ 9.043000] init: command 'chown' r=0

<6>[ 9.047000] init: command 'chmod' r=0

<6>[ 9.051000] init: command 'chmod' r=0

<6>[ 9.054000] init: command 'chmod' r=0

<6>[ 9.058000] init: command 'chown' r=-2

<6>[ 9.062000] init: command 'chown' r=-2

<6>[ 9.065000] init: command 'chown' r=-2

<6>[ 9.069000] init: command 'chown' r=-2

<6>[ 9.073000] init: command 'chown' r=-2

<6>[ 9.077000] init: command 'chown' r=-2

<6>[ 9.080000] init: command 'chown' r=-2

<6>[ 9.084000] init: command 'chown' r=-2

<6>[ 9.088000] init: command 'chown' r=-2

<6>[ 9.092000] init: command 'chown' r=-2

<6>[ 9.095000] init: command 'chown' r=-2

<6>[ 9.099000] init: command 'chown' r=-2

<6>[ 9.103000] init: command 'chown' r=-2

<6>[ 9.106000] init: command 'chown' r=-2

<6>[ 9.110000] init: command 'chown' r=-2

<6>[ 9.114000] init: command 'chown' r=-2

<6>[ 9.118000] init: command 'chown' r=-2

<6>[ 9.121000] init: command 'chown' r=-2

<6>[ 9.125000] init: command 'chown' r=0

<6>[ 9.129000] init: command 'chown' r=0

<6>[ 9.132000] init: command 'chown' r=0

<6>[ 9.136000] init: command 'chown' r=0

<6>[ 9.140000] init: command 'chown' r=0

<6>[ 9.143000] init: command 'chown' r=0

<6>[ 9.147000] init: command 'chown' r=0

<6>[ 9.151000] init: command 'chown' r=0

<6>[ 9.154000] init: command 'chmod' r=0

<6>[ 9.158000] init: command 'chmod' r=0

<6>[ 9.161000] init: command 'chmod' r=0

<6>[ 9.165000] init: command 'chmod' r=0

<6>[ 9.169000] init: command 'chmod' r=0

<6>[ 9.172000] init: command 'chmod' r=0

<6>[ 9.176000] init: command 'chmod' r=0

<6>[ 9.180000] init: command 'chmod' r=0

<6>[ 9.183000] init: command 'chmod' r=0

<6>[ 9.187000] init: command 'chmod' r=0

<6>[ 9.191000] init: command 'chmod' r=0

<6>[ 9.194000] init: command 'chmod' r=0

<6>[ 9.198000] init: command 'chmod' r=0

<6>[ 9.201000] init: command 'chmod' r=0

<6>[ 9.205000] init: command 'chmod' r=0

<6>[ 9.209000] init: command 'chmod' r=0

<6>[ 9.212000] init: command 'chmod' r=0

<6>[ 9.216000] init: command 'chmod' r=0

<6>[ 9.220000] init: command 'chmod' r=0

<6>[ 9.224000] init: command 'chmod' r=0

<6>[ 9.227000] init: command 'chmod' r=0

<6>[ 9.231000] init: command 'chmod' r=0

<6>[ 9.234000] init: command 'chmod' r=0

<6>[ 9.238000] init: command 'chmod' r=0

<6>[ 9.246000] init: command 'chmod' r=0

<6>[ 9.246000] init: command 'setprop' r=0

<6>[ 9.249000] init: command 'setprop' r=0

<6>[ 9.253000] init: command 'setprop' r=0

<6>[ 9.257000] init: command 'setprop' r=0

<6>[ 9.260000] init: command 'setprop' r=0

<5>[ 9.267000] init: starting 'console'

<5>[ 9.281000] init: starting 'display'

<5>[ 9.284000] init: starting 'remotecfg'

<5>[ 9.287000] init: starting 'servicemanager'

<5>[ 9.321000] init: starting 'vold'

<5>[ 9.324000] init: starting 'netd'

<5>[ 9.327000] init: starting 'debuggerd'

<6>[ 9.328000] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'

<6>[ 9.335000] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'

<5>[ 9.374000] init: starting 'zygote'

<5>[ 9.377000] init: starting 'media'

<6>[ 9.382000] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'

<5>[ 9.432000] init: starting 'dbus'

<6>[ 9.433000] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'

<5>[ 9.443000] init: starting 'installd'

<5>[ 9.445000] init: starting 'flash_recovery'

<6>[ 9.492000] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'

<5>[ 9.536000] init: starting 'keystore'

<5>[ 9.539000] init: starting 'audio'

<6>[ 9.572000] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'

<5>[ 9.575000] init: starting 'memsicd'

<6>[ 9.580000] init: command 'class_start' r=0

<6>[ 9.661000] init: command 'chmod' r=0

<6>[ 9.661000] init: command 'chmod' r=0

<6>[ 9.663000] init: command 'chmod' r=0

<6>[ 9.666000] init: command 'chmod' r=0

<6>[ 9.670000] init: command 'chmod' r=0

<6>[ 9.724000] init: command 'chmod' r=0

<6>[ 9.724000] init: command 'chmod' r=0

<6>[ 9.726000] init: command 'chmod' r=0

<6>[ 9.730000] init: command 'chmod' r=0

<6>[ 9.983000] init: command 'chmod' r=0

<6>[ 9.983000] init: command 'chmod' r=0

<6>[ 9.985000] init: command 'chmod' r=0

<6>[ 10.017000] init: command 'chmod' r=0

<6>[ 10.017000] init: command 'chmod' r=0

<6>[ 10.019000] init: command 'chmod' r=0

<6>[ 10.073000] init: command 'chmod' r=0

<6>[ 10.073000] init: command 'chmod' r=0

<6>[ 10.075000] init: command 'chmod' r=0

<6>[ 10.079000] init: command 'symlink' r=0

<4>[ 10.102000] tvmode set to panel

<4>[ 10.102000]


<4>[ 10.102000] don't set the same mode as current.


<4>[ 10.106000] osd0=>x:0 ,y:0,w:800,h:480


<4>[ 10.106000] osd1=> x:0,y:0,w:18,h:18


<6>[ 10.166000] init: command 'chmod' r=0

<6>[ 10.166000] init: command 'chmod' r=0

<6>[ 10.168000] init: command 'chmod' r=0

<6>[ 10.201000] init: command 'chmod' r=0

<6>[ 10.201000] init: command 'chmod' r=0

<6>[ 10.201000] init: command 'write' r=0

<6>[ 10.201000] init:

<6>[ 10.201000] === property triggers ===

<6>[ 10.201000] init: processing action 0x2fa50 (property:persist.service.adb.enable=1)

<5>[ 10.201000] init: starting 'adbd'

<6>[ 10.201000] init: command 'start' r=0

<6>[ 10.201000] init: processing action 0x30008 (property:hw.nophone=true)

<6>[ 10.201000] init: command 'stop' r=0

<6>[ 10.202000] init: waitpid returned pid 54, status = 00000000

<5>[ 10.202000] init: process 'remotecfg', pid 54 exited

<6>[ 10.202000] init: waitpid returned pid 69, status = 00000000

<5>[ 10.202000] init: process 'memsicd', pid 69 exited

<6>[ 10.273000] warning: `adbd' uses 32-bit capabilities (legacy support in use)

<6>[ 10.275000] enabling adb

<6>[ 10.341000] adb_open

<6>[ 10.470000] DWC_otg: USB RESET

<6>[ 10.593000] init: waitpid returned pid 53, status = 00000000

<5>[ 10.593000] init: process 'display', pid 53 exited

<6>[ 10.632000] DWC_otg: USB RESET

<6>[ 10.839000] android_usb gadget: high speed config #1: android

<6>[ 10.839000] adb_release

<3>[ 10.842000] init: sys_prop: permission denied uid:2000 name:adb.connected

<6>[ 10.849000] adb_open

<3>[ 11.041000] init: sys_prop: permission denied uid:2000 name:adb.connected

<6>[ 11.452000] init: waitpid returned pid 68, status = 00006300

<5>[ 11.453000] init: process 'audio', pid 68 exited

<4>[ 13.234000] ***Entered sound/soc/aml/aml_dai.c:aml_dai_startup

<4>[ 13.265000] ***Entered sound/soc/aml/aml_m1_mid_es8328.c:aml_m1_hw_params

<4>[ 13.266000] soc_es8328_set_fmt:fmt=12288

<3>[ 13.270000] ES8328: soc_es8328_set_fmt() codec dai fmt slave

<3>[ 13.276000] ES8328: soc_es8328_set_fmt() codec dai fmt i2s

<3>[ 13.281000] ES8328: soc_es8328_set_fmt() codec dai fmt normal sclk

<4>[ 13.287000] ***Entered sound/soc/aml/aml_dai.c:aml_dai_set_dai_fmt

<4>[ 13.294000] soc_es8328_pcm_hw_params

<4>[ 13.297000] soc_es8328_get_clk

<4>[ 13.300000] ***Entered sound/soc/aml/aml_dai.c:aml_dai_hw_params

<4>[ 13.392000] HDMI: aout notify rate 44100

<4>[ 13.392000] ***Entered sound/soc/aml/aml_m1_mid_es8328.c:aml_m1_set_bias_level: 1

<4>[ 13.398000] WQ ############## flag = 0,

<4>[ 13.402000] soc_es8328_set_bias_level

<4>[ 13.406000] partial on

<4>[ 13.441000] pop test : Queue Left DAC: reg=0x4, 0x0/0x80

<4>[ 13.451000] pop test : Queue Right DAC: reg=0x4, 0x0/0xc0

<4>[ 13.461000] pop test : Applying 0x0/0xc0 to 4 in 2ms

<4>[ 13.481000] pop test : Queue Left Mixer: reg=0xffffffff, 0x1/0x1

<4>[ 13.491000] pop test : Queue Right Mixer: reg=0xffffffff, 0x1/0x1

<4>[ 13.501000] pop test : Queue Left Out 1: reg=0x4, 0x20/0x20

<4>[ 13.510000] pop test : Queue Right Out 1: reg=0x4, 0x30/0x30

<4>[ 13.521000] pop test : Applying 0x30/0x30 to 4 in 2ms

<4>[ 13.540000] pop test : Right Out 1 POST_PMU

<4>[ 13.551000] dac_start_event() event[2]

<4>[ 13.551000]

<4>[ 13.551000] ***Entered sound/soc/aml/aml_m1_mid_es8328.c:aml_m1_set_bias_level: 0

<4>[ 13.558000] WQ ############## flag = 0,

<4>[ 13.563000] soc_es8328_set_bias_level

<4>[ 13.566000] full on

<4>[ 13.601000] DAPM sequencing finished, waiting 2ms

<4>[ 13.610000] soc_es8328_digital_mute,off

<6>[ 14.397000] init: waitpid returned pid 63, status = 00000100

<5>[ 14.398000] init: process 'flash_recovery', pid 63 exited

<4>[ 18.550000] Headphone pluged in

<4>[ 18.551000] DAPM sequencing finished, waiting 2ms

<4>[ 18.560000] WQ ############## flag = 1,

<4>[ 18.561000] DAPM sequencing finished, waiting 2ms

<4>[ 20.143000] UMP<2>: New session opened

<4>[ 20.241000] Mali<2>: MMU session begin

<4>[ 20.241000] Mali<2>: Page directory for session 0xdd4ad6a0 placed at physical address 0x9F284000

<4>[ 20.248000] Mali<2>: MMU session begin: success

<4>[ 20.252000] Mali<2>: Core: session_begin: for Mali-400 PP

<4>[ 20.258000] Mali<2>: Core: session_begin: for Mali-400 GP

<5>[ 20.427000] init: starting 'bootanim'

<5>[ 44.112000] init: starting 'wpa_supplicant'

<6>[ 44.113000] init: Created socket '/dev/socket/wpa_wlan0' with mode '666', user '1000', group '1010'

<4>[ 44.344000] +8192cu_drv - drv_open, bup=0

<4>[ 44.399000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC

<4>[ 44.400000] fw_ver=v68, fw_subver=1, sig=0x88c0

<4>[ 44.460000] fw download ok!

<4>[ 44.460000] Set RF Chip ID to RF_6052 and RF type to 1T1R.

<4>[ 44.463000] rf_chip=0x4, rf_type=0x3

<4>[ 44.816000] Mali<1>: mali_kernel_memory_mmu_interrupt_handler_upper_hal f

<4>[ 44.816000] Mali: Page fault on Mali-400 MMU for GP

<4>[ 44.816000] Mali: Page fault detected at 0x6382d6b8 from bus id 1 of type write on Mali-400 MMU for GP

<4>[ 44.816000] Mali: Active page directory at 0x9F284000

<4>[ 44.816000] Mali: Info from page table for VA 0x6382d6b8:

<4>[ 44.816000] Mali: DTE entry: PTE at 0x0 marked as not present

<4>[ 44.816000] Mali: PTE entry: Not present

<4>[ 44.816000] Mali<2>: Handling: bus stop Mali-400 PP

<4>[ 44.816000] Mali<2>: Handling: bus stop Mali-400 GP

<6>[ 44.819000] init: processing action 0x312e8 (property:dev.bootcomplete=1)

<6>[ 44.819000] init: command 'chmod' r=0

<6>[ 44.819000] init: command 'chmod' r=-2

<6>[ 44.819000] init: command 'chmod' r=0

<6>[ 44.819000] init: command 'chmod' r=0

<6>[ 44.819000] init: command 'chmod' r=-2

<6>[ 44.819000] init: command 'chmod' r=0

<6>[ 44.819000] init: command 'chmod' r=0

<6>[ 44.819000] init: command 'chmod' r=0

<6>[ 44.819000] init: command 'chmod' r=0

<6>[ 44.819000] init: command 'chmod' r=0

<5>[ 44.820000] init: starting 'camera_clk'

<6>[ 44.821000] init: command 'start' r=0

<6>[ 44.920000] request_suspend_state: wakeup (3->0) at 44744000001 (2012-02-25 10:12:55.134999998 UTC)

<4>[ 44.947000] write cbus reg 0x1076 value 30f

<4>[ 44.947000] write cbus reg 0x1076 value 30f

<4>[ 44.972000] write cbus reg 0x106d value 232

<4>[ 44.972000] write cbus reg 0x106d value 232

<6>[ 45.091000] init: waitpid returned pid 140, status = 0000ff00

<5>[ 45.091000] init: process 'camera_clk', pid 140 exited

<6>[ 45.448000] init: waitpid returned pid 101, status = 00008900

<5>[ 45.448000] init: process 'bootanim', pid 101 exited

<4>[ 45.953000] IQK:Start!!!

<4>[ 45.970000] Path A IQK Success!!

<4>[ 45.994000] Path A IQK Success!!

<4>[ 46.000000] IQK: final_candidate is 0

<4>[ 46.000000] IQK: RegE94=101 RegE9C=10 RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0

<4>[ 46.000000] Path A IQ Calibration Success !

<4>[ 46.966000] MAC Address from REG = 0-18-11-19-99-6f

<4>[ 46.967000] pdmpriv->TxPowerTrackControl = 1

<4>[ 46.967000] MAC Address = 0-18-11-19-99-6f

<4>[ 46.974000] -8192cu_drv - drv_open, bup=1

<6>[ 46.974000] ADDRCONF(NETDEV_UP): wlan0: link is not ready

<4>[ 47.381000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!

<4>[ 47.382000] set_mode = IW_MODE_INFRA

<4>[ 47.504000] DBG_IOCTL rtw_wx_get_scan:1924

<4>[ 47.504000] DBG_IOCTL rtw_wx_get_scan:1982 return 0

<4>[ 47.507000] DBG_IOCTL rtw_wx_set_scan:1796

<4>[ 47.834000] DBG_IOCTL rtw_wx_set_scan:1796

<4>[ 47.834000] rtw_wx_set_scan exit cause fw state(808) mismatch

<4>[ 48.885000] survey done event(0x9)

<4>[ 48.886000] DBG_IOCTL rtw_wx_get_scan:1924

<4>[ 48.887000] DBG_IOCTL rtw_wx_get_scan:1982 return 0

<4>[ 48.909000] wpa_set_auth_algs, AUTH_ALG_SHARED_KEY and AUTH_ALG_OPEN_SYSTEM [value:0x3]

<4>[ 48.915000] wpa_set_encryption, crypt.alg = WEP

<4>[ 48.916000] (1)wep_key_idx=0

<4>[ 48.919000] wep, set_tx=1

<4>[ 48.921000] ==> rtw_set_key algorithm(5),keyid(0),key_mask(1)

<4>[ 48.927000] rtl8192c_setkey_hdl

<4>[ 48.980000] ==>pwr_state_check_handler .fw_state(8)

<4>[ 48.980000] ==> rtw_ps_cmd , enqueue CMD

<4>[ 48.984000] ==>rtw_ps_processor .fw_state(8)

<4>[ 48.988000] ==>ips_enter cnts:1

<4>[ 49.022000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020800)....

<4>[ 49.022000]

<4>[ 49.025000] ===> rtw_ips_pwr_down...................

<4>[ 49.030000] ips_dev_unload...

<4>[ 49.033000] +ips_dev_unload

<4>[ 49.061000] usb_read_port_cancel

<4>[ 49.062000] usb_write_port_cancel

<4>[ 49.064000] set_mode = IW_MODE_INFRA

<4>[ 49.066000] DBG_IOCTL rtw_wx_set_essid:2017

<4>[ 49.071000] r8192_dev_unload()->rtl8192_hal_deinit()

<4>[ 49.075000] ==> rtl8192cu_hal_deinit

<4>[ 49.079000] bkeepfwalive(1)

<4>[ 49.082000] ==> _ps_close_RF

<4>[ 49.141000] -ips_dev_unload

<4>[ 49.141000] <=== rtw_ips_pwr_down.....................

<4>[ 49.143000] ssid=WLAN_9A, len=7

<4>[ 49.147000] +rtw_set_802_11_ssid: ssid=[WLAN_9A] fw_state=0x00000008

<4>[ 49.153000] DBG_IOCTL rtw_wx_set_essid:2157 return -1

<4>[ 54.271000] DBG_IOCTL rtw_wx_set_scan:1796

<4>[ 54.271000]

<4>[ 54.271000] rfpwrstate_check call ips_leave....

<4>[ 54.275000] ==>ips_leave cnts:1

<4>[ 54.279000] ===> rtw_ips_pwr_up..............

<4>[ 54.283000] ips_netdrv_open

<4>[ 54.286000] ==> _ps_open_RF

<4>[ 54.297000] IQK:Start!!!

<4>[ 54.308000] Path A IQK Success!!

<4>[ 54.317000] Path A IQK Success!!

<4>[ 54.321000] IQK: final_candidate is 0

<4>[ 54.321000] IQK: RegE94=102 RegE9C=10 RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0

<4>[ 54.321000] Path A IQ Calibration Success !
Deen0X
25/04/2012, 21:21
offtopic...
alguien ha probado esta app?

Allwinner Mod
https://play.google.com/store/apps/details?id=hu.sztupy.android.allwinnermod&feature=more_from_developer
Skelton
25/04/2012, 21:24
Parece un editor de build.prop para las allwinner, debería poder servir para La yinlips A10, salvo que necesite ICS.