Skullman
24/12/2005, 19:21
Igual ya lo habeis comentado, la verdad es que con la gran cantidad de mensajes que se generan, a pesar de entrar casi a diario desde hace un par de meses, estoy seguro de que me he dejado algo por leer.
En fin, el caso es que estaba intentando investigar sobre la actualización de firmware leyendo los posts que hay por aquí (http://www.gp32spain.com/foros/showthread.php?t=25757) , los de gp32x.com (http://www.gp32x.com/board/index.php?showtopic=22383) y el wiki. El caso es que en el wiki anglosajón (http://wiki.gp2x.org/wiki/Firmware_Upgrade) dicen esto casi al final:
Yup, I can confirm that this worked for me. My 1GB SD card from gbax came with a single partition of type 06 (FAT16). This worked fine for everything except updating the firmware. When I tried to do that, I got the same results as everyone else (file being deleted without doing anything).
Deleting the partition with fdisk, creating a new one (with the type 0B) and creating a filesystem solved the problem. After doing that, I got the update box and screen was darker.
It certainly seems like the GP2X is picky about the partition type/filesystem. Thanks for the tip.
Al parecer borrar y crear una nueva partición en la SD con fdisk con el tipo 0B (ignoro si se puede hacer con el fdisk de windows) hace funcionar a algunas tarjetas donde no permitía actualizar el firmware.
¿Tal vez si todos usamos ese sistema de particionamiento se solucione el problema de los ladrillos? No se si tendrá mucho que ver, pero viendo que el hardware es bastante especial con cascos (por lo leído unos funcionan y otros no) y con algunos modelos de tarjeta, tal vez el sistema de particionamiento también influya. :confused:
En fin, el caso es que estaba intentando investigar sobre la actualización de firmware leyendo los posts que hay por aquí (http://www.gp32spain.com/foros/showthread.php?t=25757) , los de gp32x.com (http://www.gp32x.com/board/index.php?showtopic=22383) y el wiki. El caso es que en el wiki anglosajón (http://wiki.gp2x.org/wiki/Firmware_Upgrade) dicen esto casi al final:
Yup, I can confirm that this worked for me. My 1GB SD card from gbax came with a single partition of type 06 (FAT16). This worked fine for everything except updating the firmware. When I tried to do that, I got the same results as everyone else (file being deleted without doing anything).
Deleting the partition with fdisk, creating a new one (with the type 0B) and creating a filesystem solved the problem. After doing that, I got the update box and screen was darker.
It certainly seems like the GP2X is picky about the partition type/filesystem. Thanks for the tip.
Al parecer borrar y crear una nueva partición en la SD con fdisk con el tipo 0B (ignoro si se puede hacer con el fdisk de windows) hace funcionar a algunas tarjetas donde no permitía actualizar el firmware.
¿Tal vez si todos usamos ese sistema de particionamiento se solucione el problema de los ladrillos? No se si tendrá mucho que ver, pero viendo que el hardware es bastante especial con cascos (por lo leído unos funcionan y otros no) y con algunos modelos de tarjeta, tal vez el sistema de particionamiento también influya. :confused: